Scaffolding Fittings and Couplers

Scaffolding tubes used as Standard, Ledgers, Transoms, Tie and Bracing in Tube & coupler type scaffolding. Also used as Bracing and Tie in System Scaffolding

Drop Forged type double couplers provide stronger grip. Easier to handle when connecting standard to standard or ledger to ledger and any tube having an outside diameter of 48.3mm at right angle or 900

Drop Forged type swivel couplers are flexible than the double couplers since it can connect two 48.3mm outside diameter tube at any angle.

Designed to join putlogs or transoms to ledger allowing scaffold board to be laid across on top of the putlogs or transoms.

Designed to connect scaffold tube to beam or girder flange. A pair of gravlock girder couplers must always be used.

Used to join two scaffolding tubes externally end to end. A steel divider located centrally ensures equal insertion of each tube. They can be employed where tension joints are required.

Base Plate are used at the sloping Base of the Standard in Tube and Coupler type Scaffolding for spreading the gravity loads. Conforming to EN 74 or BS 1139

Scaffolding used for access from one elevation to other Conforming to EN 131 Class 1 Available in lengths up to 6m and can produce longer length

Heavy Duty Self Closing Scaffold Swing Gate. Key Features: Heavy Duty Light Weight Self Closing Can be used on both right and left side of the access Long lasting Simple Design without the use of spring for durability. Weight – 8.2 kg Finish - Painted

Swivel Adjustable Base Jack are used at the sloping Base of the Standard in System Scaffolding for spreading the gravity loads. This component is a must for building internal Scaffolding in spherical tanks

Base Plate are used at the Base of the Standard in Tube and Coupler type Scaffolding for spreading the gravity loads. Conforming to EN 74 or BS 1139