Dubai is a major hub for construction and manufacturing in the Middle East, and as such, it is home to a number of leading suppliers and manufacturers of Galvanized Iron (GI) sheets. These sheets are widely used in construction for roofing, cladding, and in the manufacture of various products such as appliances, automotive parts, and electrical equipment.
One of the leading suppliers and manufacturers of GI sheets in Dubai is Sparsteel. Sparsteel has grown to become one of the most respected and reliable suppliers of steel products in the region. We offer a wide range of GI sheets with thicknesses ranging from 0.5mm to 3mm, and are available in a variety of sizes and lengths to suit the needs of any project.
Sparsteel's GI sheets are made from high-quality steel and are coated with a layer of zinc to protect the steel from rust and corrosion. This makes Sparsteel's GI sheets highly resistant to rust and corrosion, and able to withstand the harsh environment of the Middle East.
We also offers excellent customer service, with a team of knowledgeable and experienced staff who are able to provide expert advice and support to their customers. We also have a state-of-the-art manufacturing facility that is equipped with the latest technology and machinery, which allows us to produce large quantities of high-quality products in a short period of time.
We are the leading manufacturer and supplier of GI Sheets in UAE, Dubai, Sharjah, Abu Dhabi, Ajman, Fujairah, Ras Al Khaimah, Umm Al Quwain.
GI sheet stands for Galvanized Iron sheet. It is a type of sheet made from steel that has been coated with a layer of zinc to protect the steel from corrosion. This process is called galvanization, and it helps to extend the life of the steel and prevent rust from forming on the surface. GI sheets are commonly used in construction, particularly in roofing and cladding, as well as in the manufacture of a wide range of products such as appliances, automotive parts, and electrical equipment. The thickness of the GI sheet and the zinc coating can vary depending on the intended use and the manufacturer's specifications.
GI sheet weight chart refers to the weight of a sheet of Galvanized Iron (GI) per square meter. The thickness of the sheet and the weight per square meter are directly proportional. The weight of a sheet of GI can vary depending on its thickness, width and length.
Here is an approximate weight chart for GI sheets of thickness 0.5mm to 3.0mm:
It's also important to note that weight is not the only factor that should be considered when choosing the sheet thickness. Other factors such as the intended use, the environment where the sheet will be used and the required lifespan of the sheet should also be taken into account.
The maximum thickness of a GI sheet can vary depending on the manufacturer and their capabilities. However, in general, the maximum thickness of a GI sheet is around 3mm.
Galvanized Iron (GI) sheets are coated with a layer of zinc which helps to protect the steel from rust and corrosion. The zinc coating acts as a barrier between the steel and the environment, preventing oxygen and moisture from reaching the steel surface. This makes GI sheets highly resistant to rust and corrosion.
However, it is not completely rust-proof. Over time, the zinc coating can become damaged or worn, which can expose the steel underneath to the elements. In addition, if the sheet is scratched or dented, the zinc coating may also be damaged. If the zinc coating is damaged, rust can form on the exposed steel surface.
It is important to regularly inspect and maintain the GI sheet to ensure that the zinc coating is in good condition and to repair or replace any damaged sheets as soon as possible to prevent rust formation.
Both Galvanized Iron (GI) and Aluminium are commonly used in construction and manufacturing for a variety of applications. The choice between the two depends on the specific requirements of the project and the environment where the material will be used.
GI sheets are made of steel that has been coated with a layer of zinc to protect the steel from rust and corrosion. They are relatively inexpensive and widely available, and are commonly used in construction for roofing and cladding, as well as in the manufacture of appliances, automotive parts, and electrical equipment.
Aluminium sheets, on the other hand, are made of aluminium alloy, which is a lightweight and corrosion-resistant metal. Aluminium sheets are commonly used in construction for roofing, cladding, and in the manufacture of various products such as appliances, automotive parts, and electrical equipment.
Here are some of the advantages and disadvantages of each material:
GI sheets:
Aluminium sheets:
In general, GI sheets are a more economical option for construction projects, but Aluminium sheets are more durable and have better corrosion resistance. If weight is a concern, Aluminium sheets would be a better option, but if cost is more important, then GI sheets would be more suitable.
The lifespan of a Galvanized Iron (GI) sheet depends on various factors such as the thickness of the sheet, the environment in which the sheet is used, and the level of maintenance and protection provided to the sheet.
A GI sheet with a thickness of 0.5mm to 1.5mm can last for around 20-25 years, assuming proper installation and maintenance. Sheets with thicker gauge can last even longer.
However, the lifespan of a GI sheet can be reduced if the sheet is exposed to harsh environments, such as those with high levels of salt or chemicals, or if the sheet is not properly maintained and protected. Regular inspections and maintenance of the sheet can help to prolong its lifespan. For example, if the sheet is scratched or dented, the zinc coating may also be damaged, increasing the risk of rust formation. It is important to repair or replace any damaged sheets as soon as possible to prevent rust formation.
GI sheet's lifespan is also dependent on the specific use and the design, so it's always best to consult with a professional or the supplier for the exact lifespan of the sheet you are using.
